[TheList] Crimping Stranded RG58 to BNC

Wed May 18 18:39:56 AEST 2011

Thanks for your help guys!

Did a mixture of soldering and crimping in the end.

Thanks again,

Phil.

From: ddawson at xnet.co.nz
To: thelist at radiowiki.org.nz
Date: Sat, 14 May 2011 23:40:53 +1200
Subject: Re: [TheList] Crimping Stranded RG58 to BNC

Have you tried soldering it?

Prepare and tin the inner /core make sure
the pin still fits  then lightly solder into the hole of the centre pin then
with small pair of needle nose pliers and keeping the pin hot fit the two
together.

Bit tricky I guess at first but that what
we all did before crimp connectors.

It might be easier to buy some solid core
RG58.

Denis

From: thelist-bounces at radiowiki.org.nz
[mailto:thelist-bounces at radiowiki.org.nz] On
Behalf Of Phil W

Sent: Saturday, 14 May 2011 7:48
p.m.

To: Radio Wiki

Subject: [TheList] Crimping
Stranded RG58 to BNC

Hey guys,

I have the following tools...

BNC connector...

http://www.jaycar.co.nz/productView.asp?ID=PP0649

BNC crimping tool...

http://www.jaycar.co.nz/productView.asp?ID=TH1846

and some Stranded, RG58 cable.

Does anybody know of a good tutorial for crimping BNC's onto stranded RG58?

Cause I am lost! Especially with the difference between crimping a solid core
compared to a stranded core.

How do you stick the pin onto the stranded core?

Thanks heaps for the help,

Phil.

No virus found in this incoming message.

Checked by AVG - www.avg.com

Version: 9.0.901 / Virus Database: 271.1.1/3636 - Release Date: 05/14/11 06:34:00

_______________________________________________
TheList mailing list
TheList at radiowiki.org.nz
http://radiowiki.org.nz/mailman/listinfo/thelist_radiowiki.org.nz 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://radiowiki.org.nz/pipermail/thelist_radiowiki.org.nz/attachments/20110518/9ff15e2d/attachment.html>